timothy585
Supporting Member
I'm working with a ROC800 program offline right now.
Normally, you can switch your TLP view between text and numbers by making your choice under "Tools" > "Options".
The software will switch from text to number view just fine when selecting TLPs from the Action Block windows, but for some reason my FST Editor window will only display text and not switch to numbers anymore. This just started and I'm not sure what is going on.
Any input is appreciated.
Normally, you can switch your TLP view between text and numbers by making your choice under "Tools" > "Options".
The software will switch from text to number view just fine when selecting TLPs from the Action Block windows, but for some reason my FST Editor window will only display text and not switch to numbers anymore. This just started and I'm not sure what is going on.
Any input is appreciated.