anthr_plcnewbie
Member
I had a question regarding addressing. I already have a network where there are two nodes. The main controller is a ControlLogix L62 that has a PLC-5 as remote and another controlLogix chassis as a remote. I need to add three new VFDs. I am thinking of adding the new VFDs between the PLC-5 chassis and controlLogix chassis due to cable restrictions. Doing this, will that cause any issues with addressing in the PLC? AAccording to the program the address of the PLC-5 is node 2 and controlLogix is node 3. If I go ahead and add the VFDs between the two chassis, can the chassis nodes be the same and the three new VFDs be 4, 5 and 6?
Thanks,
Thanks,