You are not registered yet. Please click here to register!

plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
Try our online PLC Simulator- FREE.  Click here now to try it.

New Here? Please read this important info!!!

Go Back - Interactive Q & A > - Interactive Q & A > LIVE PLC Questions And Answers

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old October 23rd, 2018, 08:54 AM   #1
Viet Nam

2Faced is offline
Join Date: Oct 2018
Location: Nha Trang
Posts: 13
GE Profinet DCP Scan Tool can't get responses from Rx3i PNS001 modules


I have a question regarding the profinet setup would like to ask the experts in this forum. I'm trying to set up the names and IP addresses for the GE Rx3i PNS001 Profinet modules using the Profinet DCP Tool included in the Proficy ME 9.5 installation package. The IP address and subnet mask all set on my laptop, cat5 ethernet cable connected between the laptop and one of the ethernet ports of the PNS001 module.

1. Run Proficy ME as administrator, open the Profinet DCP tool from Utilities tab in Proficy ME, select the local network adapter and refresh device list -> I got this notification: "DCP discovery request sent, but no responses received". The DCP tool screen shows nothing.
2. Run the DCP Tool as administrator from Start Menu -> Proficy -> Profinet DCP Scan Tool -> got the same notification.
3. Use ARP table to set up IP address based on the MAC address of the module -> can't set.
4. Add exception rules for Proficy ME and Profinet DCP Tool to the Windows Firewall -> still can't make the tool to discover the module.

My laptop is running with Windows 7, Proficy ME 9.5 SIM 9. Can anyone please provide any suggestions ? Thank you and Regards.
  Reply With Quote
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
GE RX3i Profinet cegomez1 LIVE PLC Questions And Answers 0 July 19th, 2017 12:02 PM
scan question slc 5/03 just the cowboy LIVE PLC Questions And Answers 6 March 27th, 2015 10:27 AM
Point IO rack size the_msp LIVE PLC Questions And Answers 8 December 11th, 2014 12:26 PM
GE 90-30 to RX3i conversion NetNathan LIVE PLC Questions And Answers 4 December 5th, 2013 08:50 AM
GE RX3i ProfiNet Scanner IC695PNS001 mbartoli LIVE PLC Questions And Answers 1 May 16th, 2013 10:00 PM

All times are GMT -4. The time now is 09:30 PM.