cottagewood
Member
Hi all
I have 2 SLC5/04 plcs and a scada connected on DH+.
I need to add a HMI which only has DH485 of DF1 available,
I can connect to the DF1 port on 1 of the PLC's, my question is, will I be also able to access the 2nd PLC through the same port? (bridge to the DH+)
Thanks in advance
I have 2 SLC5/04 plcs and a scada connected on DH+.
I need to add a HMI which only has DH485 of DF1 available,
I can connect to the DF1 port on 1 of the PLC's, my question is, will I be also able to access the 2nd PLC through the same port? (bridge to the DH+)
Thanks in advance