DCom Member D Join Date May 2016 Location Conroe Posts 20 Nov 8, 2018 #1 Did Rockwell discontinue their NET ENI Configuration Utility Software? I searched their site and many other sites on different search engines but to no avail. I am in need of the software to program one. Thanks In Advance
Did Rockwell discontinue their NET ENI Configuration Utility Software? I searched their site and many other sites on different search engines but to no avail. I am in need of the software to program one. Thanks In Advance
Bob O Member B Join Date May 2003 Location Posts 1,875 Nov 8, 2018 #2 You may have to login... https://compatibility.rockwellautom...rumb=112&refSoft=1&toggleState=&versions=3951
You may have to login... https://compatibility.rockwellautom...rumb=112&refSoft=1&toggleState=&versions=3951
shawn_75 Member S Join Date Apr 2010 Location KY Posts 432 Nov 8, 2018 #3 You can do most of what you need to program via telnet. telnet 192.168.1.1 1500 (substitute your IP address) For other parameters you can message the nodes using a message instruction from your PLC.
You can do most of what you need to program via telnet. telnet 192.168.1.1 1500 (substitute your IP address) For other parameters you can message the nodes using a message instruction from your PLC.
DCom Member OP D Join Date May 2016 Location Conroe Posts 20 Nov 8, 2018 #4 Thanks. The link worked perfectly.