aosude99
Member
I'm trying to add a 5069-L320ER CompactLogix 5380 Controller to the communication setup under RsLinx Enterprise. I added the device under Ethernet by selecting the correct module and picking revision 30 because under the controller properties in Logix Designer program it uses 30.11. I give it a name and the correct ip address. It browses and generates those 3 children you see in the picture. My problem is I unable to see the backplane or when I browse I get no results. But I'm able to see on my "Network and Devices". This is my first time adding this "5380", I've done different ones before with success.
Please disregard the name "backplane3" I was just trying out a different name.
Please disregard the name "backplane3" I was just trying out a different name.