red lion - Fanuc LR R30ia

fannar

Member
F
Join Date
Oct 2017
Location
iceland
Posts
13
Hey guys

First thing is it possible to have 3 buttons in red lion hmi display to start 3 different fanuc programs ?

I have tried connecting Crossover cable between the hmi and fanuc trying to send registers to the fanuc but without luck.

If anyone knows how to and could point me in the direction i would be happy!

Regards
fannar
 

Similar Topics

Brijm
Red Lion and Fanuc Robot
I recently went through a training course for Fanuc Robots. That got me thinking... Has anyone used a G3 Red Lion HMI to talk between a Fanuc and...
Replies
0
Views
3,751
Brijm
Brijm
B
Red Lion G3 Hmi And Gefanuc 9030 Problems
Greetings. I'm using a new Red Lion G308 HMI with an existing GEFANUC 9030 PLC with a 364 CPU with built in Ethernet. I can communicate with...
Replies
2
Views
6,367
MikeGranby
MikeGranby
A
Trying to get copy of Red Lion G315 HMI program but support upload was not ticked.
Hi All, As a precaution my company has been collecting copies all the HMI and PLC programs. I have recorded copies of most of our sites...
Replies
0
Views
91
Angus_Fergusson
A
BobB
What has the Red Lion hiccup cost you?
While they came up quickly with a fix for the alarm date issue quickly I will have to drive around for a week or so, burning up a lot of fuel...
Replies
4
Views
299
padees
P
A
PSA: Red Lion datalog, alarm and event date/time errors
From the Red Lion website, after some customer enquiries in the last week or so... Rev. March 25, 2024 [18:30] Just thought it might help a...
Replies
9
Views
310
DwSoFt
D
Back
Top Bottom