Byron
Lifetime Supporting Member
Greetings.
I'm using a new Red Lion G308 HMI with an existing GEFANUC 9030 PLC with a 364 CPU with built in Ethernet. I can communicate with the HMI on the network, program and monitor it as well as the PLC all via the Ethernet network. I can put a data object on the screen and view live data from a register, but I have been unable to figure out how to use push button objects on the screen to turn MBITS on and off.
If anyone out there knows something about this configuration I'd appreciate hearing from you.
Cheers,
Byron K. Sanders- CST SERVICES
[email protected]
I'm using a new Red Lion G308 HMI with an existing GEFANUC 9030 PLC with a 364 CPU with built in Ethernet. I can communicate with the HMI on the network, program and monitor it as well as the PLC all via the Ethernet network. I can put a data object on the screen and view live data from a register, but I have been unable to figure out how to use push button objects on the screen to turn MBITS on and off.
If anyone out there knows something about this configuration I'd appreciate hearing from you.
Cheers,
Byron K. Sanders- CST SERVICES
[email protected]