how to use the virtual input and output in IPOS Compiler with SEW eurodrive MDX61b

yede187

Member
Y
Join Date
Sep 2020
Location
Rennes
Posts
1
Hello
I need to control a Sew Eurodrive MDX61b position (HI and LO) from a PLC S7-314-2DP with Ipos and I don't understand how to use the strong byte of the second command word.

Does anyone have an example of how to use them?
 

Similar Topics

J
Virtual Machine of Rockwell software
Hi all, I would like to replicate my PC onto a virtual machine so I could use it on a different laptop when I'm on site. I have never created a...
Replies
5
Views
253
robertmee
R
Mas01
S7/TIA Portal: HMI KTP1200 "Virtual Keypad is too small" says operator...
...and I agree. Context: TIA Portal/HMI = KTP1200 (12" screen) In the attached redacted image, the values in the white boxes are entered by the...
Replies
10
Views
712
mk42
M
M
Virtual HMI with CCW?
Is there any way to use a Virtual HMI (running on a PC) with CCW? This is for an application where there will be an actual HMI (PV800) connected...
Replies
4
Views
409
GaryS
G
J
virtual box serial port com 1
i have a dell laptop with a real com port host OS is windows 10. Running VB 6.1.42 I cannot get the serial port to configure in VB. Please Help...
Replies
10
Views
1,029
drbitboy
drbitboy
M
Using virtual windows xp to use concept2.6 modicon (shnieder)
My main laptop operating system is windows10. I have concept2.6 offline version. Since concept2.6 comply with windows xp, so i using vm...
Replies
2
Views
701
Mohammed zaid
M
Back
Top Bottom