sea2852003
Member
- Join Date
- May 2005
- Posts
- 1
i have op5&op15&op25&op35&op7&op17&op27 and i have protool v4&v6 but i donot know how i make upload to program plz answer me
how can i make upload and download?
- Thread starter sea2852003
- Start date
None of the mentioned panels have the feature that you can upload the application into Protool for further editing. That is only supported on the Windows CE based panels.
The OPx7 panels support upload with the Prosave utility.
The uploaded file is an image file that can be downloaded to another panel of the same type.
It cannot be loaded into Protool.
The OPx7 panels support upload with the Prosave utility.
The uploaded file is an image file that can be downloaded to another panel of the same type.
It cannot be loaded into Protool.
Similar Topics
Good people of PLCs.net,
I am currently working with an HMI that is advantech 1250H, that communicates with a 1769 Compact logix and Currently...
Hello,
I have a machine with a 1756-L72 Controllogix PLC and 1756-EN2T network card, and PanelView Plus 7 HMI. I am using RSLogix V20.05.00...
Hi everyone,
i have multiple Omron hmi terminals in the plant and i need to upload each program. i have an ns8-tv01b-v2 terminal in the office...
Hi all, I have existing S7 200 smart PLC system, I don't know what software version they used to program it. I use microwin smart version 2.3 to...
I try to get user application software from cpu which writed using loadder language or any one of IEC languages.
I forget how i can...
