VIRUZIE
Member
Hello, I have this project that I need to connect a flow meter (http://www.powogaz.com.pl/pliki/prod...l_K_52_420.pdf ) to control a metering pump from prominent gamma/ L Solenoid Diaphragm Metering Pump type).
The problem is that I need to program using Allen bradley rslogix 500 or 5000 plc for the flow meter to stop the pump let say after every 10 litres of flow. I guess the flow meter gives pulse so I could connect it to a digital input.
I do not have much experience in PLC programming and I would be glad if somebody can help me with an idea on how I should go about with the program.
I have no knowledge about metering pumps but this is what I am suppose to use: http://www.prominentfluid.com.au/upl...ng%20Pumps.pdf
Your comments are welcome.
The problem is that I need to program using Allen bradley rslogix 500 or 5000 plc for the flow meter to stop the pump let say after every 10 litres of flow. I guess the flow meter gives pulse so I could connect it to a digital input.
I do not have much experience in PLC programming and I would be glad if somebody can help me with an idea on how I should go about with the program.
I have no knowledge about metering pumps but this is what I am suppose to use: http://www.prominentfluid.com.au/upl...ng%20Pumps.pdf
Your comments are welcome.