Hello Guys,
I'm using Wincc V13 in the TIA portal environment. With the configuration, s7-1500 PLC and TP1200 HMI. In the PLC I have an DB filled with UDT's.
I've tried to add a tag to the HMI, which is an UDT in the PLC. I want to connect the tag to a faceplate. But when I am adding the tag, I have the following failure:
I have read something about WinCC RT Professional, does somebody have the solution, or got this to work?
Regards,
Jurgen
I'm using Wincc V13 in the TIA portal environment. With the configuration, s7-1500 PLC and TP1200 HMI. In the PLC I have an DB filled with UDT's.
I've tried to add a tag to the HMI, which is an UDT in the PLC. I want to connect the tag to a faceplate. But when I am adding the tag, I have the following failure:
I have read something about WinCC RT Professional, does somebody have the solution, or got this to work?
Regards,
Jurgen