You are not registered yet. Please click here to register!

plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!

Go Back - Interactive Q & A > - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Thread Tools Display Modes
Old February 14th, 2018, 04:04 AM   #1
Saudi Arabia

quaiser is offline
Join Date: Feb 2018
Location: al kharj
Posts: 1
saia plc pcd2 m5540 xob 13 error

i have a machine with SAIA model number PCD2.M5540. Recently i am facing issue regarding the run and stop mode. i tried setting the plc to run mode manually... it runs for few minutes and again goes back to the stop mode.. and an error XOB13 is flashed in the display.
i would be very grateful if anybody could help me solve this problem.
  Reply With Quote
Old February 14th, 2018, 02:27 PM   #2

gclshortt is offline
gclshortt's Avatar
Join Date: Dec 2014
Location: Cobourg
Posts: 2,749

XOB 13 error seems to be a general one that could be a number of items. Please check the above manual.

From the IO manual:
An XOB 13 is called in following cases:
■ If module is not present into the PCD slot and Program tries to access it with
‘Direct Access Instructions’
■ During an internal reset of the module
If XOB13 is not programmed then Error Flags is set.

Direct input or output access in IL
The XOB 13 error happens if the PCD wants communicate with the module but it is
not in the slot.
In case of reset of the module (Watchdog UC), XOB13 happens if PCD try access to
the module during restart.

Hope this helps you out.
Connect with us on Facebook:
  Reply With Quote
Old February 21st, 2018, 02:54 PM   #3

Bardes is offline
Join Date: Aug 2007
Location: Skien
Posts: 38
saia plc pcd2 m5540 xob 13 error

As mentioned XOB13 can be triggered from several errors .
The history log could indicate at what program step the error appears.
If there is a XOB13 program, it may contain debug information (Diag writes 12 registers containing error info)

  Reply With Quote
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Error connecting ABB AC500 PLC to Beckhoff Drive AX5103 via EtherCAT - Error F4A5 matt_sd LIVE PLC Questions And Answers 3 August 22nd, 2017 08:50 AM
MICROLOGIX 1400 Allen Bradley PLC going to fault Major ERROR C0020h after few days. hinddhindsa LIVE PLC Questions And Answers 1 November 3rd, 2016 09:15 AM
Omron Cj1m glenncovington LIVE PLC Questions And Answers 10 March 7th, 2012 06:01 PM
Plc suggestion aec LIVE PLC Questions And Answers 36 January 2nd, 2012 01:56 AM
Real World Problem Vietnam Bob LIVE PLC Questions And Answers 8 November 23rd, 2002 03:03 PM

All times are GMT -5. The time now is 06:59 AM.