HackWithALaptop
Member
Title says most of it. I have a module mismatch error in a Logix PLC (v30.11). The setup is for a standard I/O module, but the installed card is a 1734-ARM Rev. C. I have the EDS file from RA, and RSLinx sees the card fine, but the project is giving me an I/O comms error, and I can't remember how to get the PLC to recognize the card. I deleted the old card from slot 3 (this is a Point IO setup BTW) and tried adding a new one, but its not on the list. I tried the generic module option but cant find instructions on how to set that up to recognize the card.
What am I missing?
Thanks in advance.
What am I missing?
Thanks in advance.
Last edited: