NapierianLog
Member
Is there a way to add a Point IO card to a project with a control logix processor (version 30 or 31 I believe) while online and in run mode without doing a download?
I need to add a 1734-IT2I thermocouple card to an existing point IO chassis but downtime for the line is limited. The communications adapter on this chassis is a 1734-AENTR if that matters.
Thanks!
I need to add a 1734-IT2I thermocouple card to an existing point IO chassis but downtime for the line is limited. The communications adapter on this chassis is a 1734-AENTR if that matters.
Thanks!