Joel Mancilla
Member
- Join Date
- Jun 2003
- Posts
- 53
Hi All,
Just want to make sure it will not burned again.
We have a equipment called inspection camera it bad product and kick it by compressed air. The system is basically a normal computer. My problem was since the machine is idle I made a wire harness on it (main power supply, vdc wires and serial connectors). When I turned it on the equipment the smoke came out from the panel board I immediately turn off the main supply. After checking I found that the 125VAC filter/supperssor is burned, the output of the filter is going to computer power supply (24VDC & 5VDC) and another power supply for some output interface (solenoid valves).
Now my question is what are the normal causes of this? I have check the input and output connection to ground but I cant find grounded. I have another unit but I'm afraid to install it. Please help what need to be checked....
The filter is
KLEEN LINE
SELF/T-20
120VAC, 20A
58,500 surge amp
Many thanks in advance
Joel
Just want to make sure it will not burned again.
We have a equipment called inspection camera it bad product and kick it by compressed air. The system is basically a normal computer. My problem was since the machine is idle I made a wire harness on it (main power supply, vdc wires and serial connectors). When I turned it on the equipment the smoke came out from the panel board I immediately turn off the main supply. After checking I found that the 125VAC filter/supperssor is burned, the output of the filter is going to computer power supply (24VDC & 5VDC) and another power supply for some output interface (solenoid valves).
Now my question is what are the normal causes of this? I have check the input and output connection to ground but I cant find grounded. I have another unit but I'm afraid to install it. Please help what need to be checked....
The filter is
KLEEN LINE
SELF/T-20
120VAC, 20A
58,500 surge amp
Many thanks in advance
Joel