jtautomation
Member
Hello, I'm using a 1734-IE2V for a load cell.
We want to measure between -5Kn to +5Kn.
See attached photo.
I'm assuming using Voltage Range of -10V to 10V would be best.
For High Engineering Unit should i use 10,000 or 5,000 and for Low Engineering Unit should i use -10,000 or -5,000?
Do i need anything for digital filter?
Thank you for your support
We want to measure between -5Kn to +5Kn.
See attached photo.
I'm assuming using Voltage Range of -10V to 10V would be best.
For High Engineering Unit should i use 10,000 or 5,000 and for Low Engineering Unit should i use -10,000 or -5,000?
Do i need anything for digital filter?
Thank you for your support