Hello Everyone,
What is the best practice for DLR set up. Should I keep all VFDs on one DLR and FlexIO on another or it would make sense to put all of the devices on one DLR.
The DLR consists of below hardware.
FlexIO - enet modules 14 with IO count of less than a 1000
VFDs - 20 mix of 525 and 70s with 20-comm card
PLC - 1756-L83EP
Thank you for your help
Raama
What is the best practice for DLR set up. Should I keep all VFDs on one DLR and FlexIO on another or it would make sense to put all of the devices on one DLR.
The DLR consists of below hardware.
FlexIO - enet modules 14 with IO count of less than a 1000
VFDs - 20 mix of 525 and 70s with 20-comm card
PLC - 1756-L83EP
Thank you for your help
Raama