KingPresident
Member
Hello all. I'm making basic diagnostic pages for each IO card. Does anyone have icons for a 1769-IQ16 or a 1768-OB16?
1769 IO rack pictures for HMI screens
- Thread starter KingPresident
- Start date
James Mcquade
Member
i don't, but i typically have a page of 16 in or out for maintenance with the plc program descriptions on the page. RED - input off, Green - Input on.
same for outputs.
regards,
james
same for outputs.
regards,
james
alan_505
Lifetime Supporting Member
There may be faceplates or CAD drawings on the Rockwell website.
James Mcquade
Member
alan_505 is correct.
i downloaded the faceplate dxf file.
james
i downloaded the faceplate dxf file.
james
KingPresident
Member
OP
Awesome. Thanks for the tip!
Similar Topics
my customer has a full 1769-compactlogix rack. they want to remove the two cards in slot 5 and slot 6 and replace them with two new cards. The...
Hey Guys,
Quick question, How many modules can you have on a 1769 compact logix rack before you need to install two of those end caps to start a...
I need to extend a 1769 I/O rack to another adjacent enclosure.
Has anyone has success disassembling the electronics from the plastic housing...
We had a Processor Failure yesterday. Opened a new in the box Processor, and could not get BootP to work with it. After a few hours of trying...
I have a 120V relay, 120V DI card and a analog input. I was wanting to know if i could put a 24V DI and well as a 120V DI card on the same plc...