KingPresident
Member
Hello all. I'm making basic diagnostic pages for each IO card. Does anyone have icons for a 1769-IQ16 or a 1768-OB16?
1769 IO rack pictures for HMI screens
- Thread starter KingPresident
- Start date
James Mcquade
Member
i don't, but i typically have a page of 16 in or out for maintenance with the plc program descriptions on the page. RED - input off, Green - Input on.
same for outputs.
regards,
james
same for outputs.
regards,
james
alan_505
Lifetime Supporting Member
There may be faceplates or CAD drawings on the Rockwell website.
James Mcquade
Member
alan_505 is correct.
i downloaded the faceplate dxf file.
james
i downloaded the faceplate dxf file.
james
KingPresident
Member
OP
Awesome. Thanks for the tip!
Similar Topics
my customer has a full 1769-compactlogix rack. they want to remove the two cards in slot 5 and slot 6 and replace them with two new cards. The...
Hey Guys,
Quick question, How many modules can you have on a 1769 compact logix rack before you need to install two of those end caps to start a...
I need to extend a 1769 I/O rack to another adjacent enclosure.
Has anyone has success disassembling the electronics from the plastic housing...
Does anyone know what the data transfer rate for this series of CompactLogix PLC's? 1769-L24ER-QB1B to be exact.
Cheers.
I have a CompactLogix 1769-L31 and need to communicate with it. I only have studio 5000 on my computer. However, when I try to start a new project...