1769-L33ERMS Ok & Safety Ok Slow blink

vcvjetan

Member
Join Date
Jul 2023
Location
Canada
Posts
2
Hi,

I have an 1769-L33ERMS that I swapped out for a spare because it was causing issues. When power cycled it would hold the Ok and Safety Ok lights red and only blink them every 10s. And then would stay in this state indefinitely. Then randomly on other power cycles it would boot up normally. I have not found this described anywhere else so any information would be appreciated I want to know if I can salvage this controller or if it is dead and gone.

Thanks.
 

Similar Topics

Hello, I am commissioning a 1769-L33ERMS compact guard logix 5370 safety controller and am running into an issue with the safety ethernet...
Replies
2
Views
1,223
Hi All, I have a safety compact logix PLC. I was wondering if anyone has experience in getting both of the ethernet ports on the device to have 2...
Replies
4
Views
3,377
We had a Processor Failure yesterday. Opened a new in the box Processor, and could not get BootP to work with it. After a few hours of trying...
Replies
5
Views
212
I have a 120V relay, 120V DI card and a analog input. I was wanting to know if i could put a 24V DI and well as a 120V DI card on the same plc...
Replies
1
Views
108
Does anyone know what the data transfer rate for this series of CompactLogix PLC's? 1769-L24ER-QB1B to be exact. Cheers.
Replies
1
Views
135
Back
Top Bottom