Hi, I was looking for some help on configuring a 1784-PCMK Version A card to work with Allen Bradley AB6200 software in Dos, to connect to an AB PLC2. I actually work in our office IT department at work, but have been asked by some electricians to help them replace obsolete programming devices that are falling apart (updating the PLC's is not an option).
So far I have configured some old Dell laptops with a windows XP/Dos dual boot setup, I have got the comms working for all PLC types the electricians use except the AB PLC2 using the PCMK /A card.
I have even managed to get the laptop working with the PCMK VERSION B CARD, but we have two version A and two version B cards, so I want to try and put the A cards to good use.
Can anyone guide me with this please? I have the S/W for both AB6200 and Cardware.
Regards,
Marcus.
So far I have configured some old Dell laptops with a windows XP/Dos dual boot setup, I have got the comms working for all PLC types the electricians use except the AB PLC2 using the PCMK /A card.
I have even managed to get the laptop working with the PCMK VERSION B CARD, but we have two version A and two version B cards, so I want to try and put the A cards to good use.
Can anyone guide me with this please? I have the S/W for both AB6200 and Cardware.
Regards,
Marcus.
