I have a big problem when I install 2 1784-PKTXD on desktop.
Desktop: Compaq PII, Windows NT 4.0.
I setup the jumper 2 and 3 for 1784-PKTXD, 5 PCI slot in Desktop, enter into BIOS, I can found 2 new other network card in the PCI.
When I entered into Windows NT4.0(SP6), check IRQ can not found 1784-PKTXD.
Shut down the desktop, enter into BIOS, found the 3com PCI network card and Grapic card use IRQ 10,11.
switch IRQ for 1784-PKTXD, only IRQ5/10/11 can be selected, setup IRQ10/11 for 1784-PKTXD card, restart the computer, but can not found 2 cards in Windows NT 4.0.
Please advise and Thanks in advaned, How to set up IRQ and memory address for two card?
Desktop: Compaq PII, Windows NT 4.0.
I setup the jumper 2 and 3 for 1784-PKTXD, 5 PCI slot in Desktop, enter into BIOS, I can found 2 new other network card in the PCI.
When I entered into Windows NT4.0(SP6), check IRQ can not found 1784-PKTXD.
Shut down the desktop, enter into BIOS, found the 3com PCI network card and Grapic card use IRQ 10,11.
switch IRQ for 1784-PKTXD, only IRQ5/10/11 can be selected, setup IRQ10/11 for 1784-PKTXD card, restart the computer, but can not found 2 cards in Windows NT 4.0.
Please advise and Thanks in advaned, How to set up IRQ and memory address for two card?