bigguyj Member B Join Date Nov 2015 Location kw Posts 1 Nov 5, 2015 #1 I have a plc 5 with a 1785 ENET card. I'm getting a flashing red stat light. Reading the manual I see its a dual port system call failed. How do I reset this? What route can I take?
I have a plc 5 with a 1785 ENET card. I'm getting a flashing red stat light. Reading the manual I see its a dual port system call failed. How do I reset this? What route can I take?
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Nov 5, 2015 #2 http://literature.rockwellautomation.com/idc/groups/literature/documents/um/enet-um001_-en-p.pdf You could look at the Diagnostic Web Pages. Perform a factory reset. Hope this helps,
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/enet-um001_-en-p.pdf You could look at the Diagnostic Web Pages. Perform a factory reset. Hope this helps,