CapinWinky
Member
I have two 22-XCOMM-DC-BASE, both with 22-COMM-E interfaces. I used BootP to set their IP addresses and they show up in RSLinx. One shows up as a red silhouette of an RJ45 jack with "DSI" under it, while the other shows up as a big yellow question mark.
The problem one returns its device name as "Port 0 - Not Present" and the product code as 65280. It also has the firmware version listed as 1.001. The good one returns "22-COMM-E" as the device name, product code 34048, and firmware version 1.008. They are consecutive serial numbers.
If i use ControlFlash on the offending one, it shows current firmware version correctly as 1.008.
Help!
The problem one returns its device name as "Port 0 - Not Present" and the product code as 65280. It also has the firmware version listed as 1.001. The good one returns "22-COMM-E" as the device name, product code 34048, and firmware version 1.008. They are consecutive serial numbers.
If i use ControlFlash on the offending one, it shows current firmware version correctly as 1.008.
Help!