Hello,
I was wondering if it is possible to include a NI8 card in an existing 4-20 loop.
I have an existing 4-20 temperature reading going from a DCS (supplies the 24Vdc) to a temperature transmitter.
I would like to send out the same reading to a SLC/05 through a NI8 card is this possible.
I attached a drawing of the modified DCS loop going through the NI8 card.
I was wondering if it is possible to include a NI8 card in an existing 4-20 loop.
I have an existing 4-20 temperature reading going from a DCS (supplies the 24Vdc) to a temperature transmitter.
I would like to send out the same reading to a SLC/05 through a NI8 card is this possible.
I attached a drawing of the modified DCS loop going through the NI8 card.