I replaced an existing PanelView 300 with a new one. It is the same style as the old one and I took the file directly from the old one and put it on the new one. When I hooked everything up and powered it up, I got an error that reads:
634 Comms Error = 1
0, 0.
It is hooked up through DeviceNet. I double checked my wires and the configuration for the PanelView. Everything is the same except the firmware on the new one is V04.46 vs V04.41 on the old one. Anybody have any ideas?
634 Comms Error = 1
0, 0.
It is hooked up through DeviceNet. I double checked my wires and the configuration for the PanelView. Everything is the same except the firmware on the new one is V04.46 vs V04.41 on the old one. Anybody have any ideas?