Loordi100n
Member
Hi all..
Iam using A&B (slc500) and/or TSX (micro/premium) and need to send sms when an alarm is triggered.
1. Can it be done directly from I/O (i.e I1.0 -> can memory bit, done with programming, surely). But without any PC/SCADA/HMI/OPC/etc. Kinda "hardwired" way..???
2. If HMI/SCADA is in use???
What would be the best solution???
Thanks in advance...heil PLC
Iam using A&B (slc500) and/or TSX (micro/premium) and need to send sms when an alarm is triggered.
1. Can it be done directly from I/O (i.e I1.0 -> can memory bit, done with programming, surely). But without any PC/SCADA/HMI/OPC/etc. Kinda "hardwired" way..???
2. If HMI/SCADA is in use???
What would be the best solution???
Thanks in advance...heil PLC
