A question about using Global Script C in WinCC

nouvells

Member
N
Join Date
Feb 2010
Location
Da Nang
Posts
9
I want to change color or make a animation of some thing in Wincc, and I was write a code in Global Script C(that is a application in WinCC). But I don't know I have to do to link this code with a thing that i want to make a change!
Pls help me for this problem.
Thanks so much!
 

Similar Topics

C
Question about fusing in safety circuit.
Hi all, I'm working on a safety circuit and had some question about fusing. Incoming supply - 120V/15A Power supply - PSL-24-060...
Replies
5
Views
611
lendpack
L
T
IT question regarding wireless access to PLC device using a typical wireless router..
I know this can be done, but I can't get the router config right. My goal is to physically connect(using an ethernet cable) a device(PLC, RTU...
Replies
9
Views
1,045
I_Automation
I_Automation
T
Question for those of you using Virtual Machines
I'm a novice with Rockwell s/w and a rookie working with virtual machines. I needed a way to support multiple FTView ME versions. so I set up a...
Replies
5
Views
2,989
Twitch
T
1
Another PCL IO fusing question
I am looking to fuse only the commons of my IO cards to protect the plc. Each input point is rated at 6.5 mA with a total of four points, in...
Replies
2
Views
2,763
11point
1
S
Valve control question using Bailey and Wonderware
I operate a distillation column for Argon gas. It has a pressure controlling valve that cools a condenser at the top of the column with nitrogen...
Replies
4
Views
2,278
Saturn_Europa1
Saturn_Europa1
Back
Top Bottom