Hi Guys,
I'm currently in the middle of a conversion from a PanelView 1400E touch screen to a Panelview Plus 1250.
The existing panelview works fine other than it's slowly dying. It'sconnected to a PLC5/80E.
Here's the problem after the conversion and corrections to the converted program all functions appear to work ok on the PV +1250 except numeric operations can take up to 10 seconds to execute. All binary functions appear to be normal and operate almost instantly.
Upon further investigation I've found that the Block Transfer Reads and Write slow down and some timeout. Other than the blocks which are timing out, the other block transers seem like they operate ok.
I've tried deleting any aliases that reference these block transfers and still no better.
I will say I've just found reference to no gaps in the block transfer configuration in RSview ME. But does not tell me what the effect of this is.
If anybody has any ideas or heard of any problems I'd be more than happy to here from you.
Thanks
Steve
I'm currently in the middle of a conversion from a PanelView 1400E touch screen to a Panelview Plus 1250.
The existing panelview works fine other than it's slowly dying. It'sconnected to a PLC5/80E.
Here's the problem after the conversion and corrections to the converted program all functions appear to work ok on the PV +1250 except numeric operations can take up to 10 seconds to execute. All binary functions appear to be normal and operate almost instantly.
Upon further investigation I've found that the Block Transfer Reads and Write slow down and some timeout. Other than the blocks which are timing out, the other block transers seem like they operate ok.
I've tried deleting any aliases that reference these block transfers and still no better.
I will say I've just found reference to no gaps in the block transfer configuration in RSview ME. But does not tell me what the effect of this is.
If anybody has any ideas or heard of any problems I'd be more than happy to here from you.
Thanks
Steve