This one just bit our *** today. And our AB rep hadn't even heard of it.
Search the knowledge base for "ACIG 2007-05-002"
Here's a quick summary, the KB article gives part numbers that are affected. And being only 1%, we must have hit the jackpot... because out of three CNB/CNBR's, we had two that were on the bad list.
With the above-mentioned ControlLogix and CompactLogix products, hereafter referred to as Logix products, the following functional issue exists:
Functional Issue - A functional issue has been identified with a component used on the above-listed products manufactured from October 2006 through March 2007. A root-cause analysis performed on the component indicates that approximately 1.0% of the products may be affected. Depending on the type of product, the issue may result in erroneous data.
Anomalies observed to date have resulted in modules performing a safe shutdown due to internal diagnostics. To date, we have not seen any instances of erroneous data in the field as a result of this issue.
Search the knowledge base for "ACIG 2007-05-002"
Here's a quick summary, the KB article gives part numbers that are affected. And being only 1%, we must have hit the jackpot... because out of three CNB/CNBR's, we had two that were on the bad list.
With the above-mentioned ControlLogix and CompactLogix products, hereafter referred to as Logix products, the following functional issue exists:
Functional Issue - A functional issue has been identified with a component used on the above-listed products manufactured from October 2006 through March 2007. A root-cause analysis performed on the component indicates that approximately 1.0% of the products may be affected. Depending on the type of product, the issue may result in erroneous data.
Anomalies observed to date have resulted in modules performing a safe shutdown due to internal diagnostics. To date, we have not seen any instances of erroneous data in the field as a result of this issue.