BigDollaBill1234
Member
Hello,
We have a project we are working on here at the plant. 2 AB Ultra3000i with devicenet, SLC500 5/03 with devicenet scanner. I read the Ultra3000i manual about devicenet and its a head scratcher. I set up the drive for my motors and auto tuned them already, but I believe I need DEM instruction to explicit message the drive from PLC. But can someone shed some light on the subject?
My backup plan is using I/O, but I wanting to try devicenet as much as possible I am very weak at devicenet and want to use this as a learning experience.
The machine we are trying to build is a 2 axis parts loader. Z and Y axis, I would like to be able to change the parameter for both axis when the machine changes to a different part.
Thanks for any help.
We have a project we are working on here at the plant. 2 AB Ultra3000i with devicenet, SLC500 5/03 with devicenet scanner. I read the Ultra3000i manual about devicenet and its a head scratcher. I set up the drive for my motors and auto tuned them already, but I believe I need DEM instruction to explicit message the drive from PLC. But can someone shed some light on the subject?
My backup plan is using I/O, but I wanting to try devicenet as much as possible I am very weak at devicenet and want to use this as a learning experience.
The machine we are trying to build is a 2 axis parts loader. Z and Y axis, I would like to be able to change the parameter for both axis when the machine changes to a different part.
Thanks for any help.