zhoudq
Member
Hello, I used the powerflex 700 driver,the driver via 20-comm-e with PLC (1769-L32E) communication,I use the rslogix5000 software config the driver parameters and download to the driver. the parameters are acceltime1, deceltime1,speed refasel, and commanded frequence,then I download project to the PLC, now the driver with PLC communication is ok , i test the driver,but the driver can not run(the sts light is yellow flash,the PORT,MOD,NETA LED are green, the NETB LED is green flash),the HIM is dispaly stop assertd.I use DriveExecutive software monitor the driver parameter, i find no parameter group under the communication, I don't known why ? please help me be settled the troubleshooting,thank you!