Good day All,
I am getting Error 1 when I try to open trends on my client. I tried to resolve the problem by creating .cab files but that did not work. I then tried updating all my servers with the latest patch rollup and my clients stopped pulling data from the plant. When I try to open FTView SE studio/ FT linx/ Communication setup I get Error 2 and when I click OK, I get Error 3 and FTView SE studio becomes unresponsive and crashes . If I completely uninstall all the patches, my communication returns and my clients start working again but trends still give Error 1 when I try to open them. The patches I installed on the Engineering station are shown on image Patch installs.jpeg.
I have the following setup installed on 6 servers in a workgroup:
Server 1 (Primary)
OS: Windows Server 2012 R2 standard 64bit
Software installs :
-FT services v6.20,
-FTView SE Server v12.00,
-FTH Live Data Interface
-Network Directory
-FT Linx v6.20
-HMI server
Server 2
OS: Windows Server 2012 R2 standard 64bit
Software installs :
-FT services,
-FTView SE Server
Engineering Station
OS: Windows 10 Enterprise 2016 LTSB 64bit
Software installs :
-FT services v6.20,
-FTView Studio v12.00
-Studio 5000 Logix designer v33.00
-FTHSE Management Tools
Historian Server
OS: Windows Server 2012 R2 standard 64bit
Software installs :
-SQL 2016 Express
-SQL Server Management Studio 2019
-FTHSE Asset Framework
-FTHSE Server v7.01
-FTH Analysis services
-FTH Notification services
-FT VantagePoint v8.20
-FT Services
Client 1 & 2
OS: Windows 10 Enterprise 2016 LTSB 64bit
Software installs :
-FT services,
-FTView SE Client
This is my first server commissioning and I've tried to follow the manuals best as I could. If there's anyone who's faced a similar problem and resolved it please share. Thank you.
I am getting Error 1 when I try to open trends on my client. I tried to resolve the problem by creating .cab files but that did not work. I then tried updating all my servers with the latest patch rollup and my clients stopped pulling data from the plant. When I try to open FTView SE studio/ FT linx/ Communication setup I get Error 2 and when I click OK, I get Error 3 and FTView SE studio becomes unresponsive and crashes . If I completely uninstall all the patches, my communication returns and my clients start working again but trends still give Error 1 when I try to open them. The patches I installed on the Engineering station are shown on image Patch installs.jpeg.
I have the following setup installed on 6 servers in a workgroup:
Server 1 (Primary)
OS: Windows Server 2012 R2 standard 64bit
Software installs :
-FT services v6.20,
-FTView SE Server v12.00,
-FTH Live Data Interface
-Network Directory
-FT Linx v6.20
-HMI server
Server 2
OS: Windows Server 2012 R2 standard 64bit
Software installs :
-FT services,
-FTView SE Server
Engineering Station
OS: Windows 10 Enterprise 2016 LTSB 64bit
Software installs :
-FT services v6.20,
-FTView Studio v12.00
-Studio 5000 Logix designer v33.00
-FTHSE Management Tools
Historian Server
OS: Windows Server 2012 R2 standard 64bit
Software installs :
-SQL 2016 Express
-SQL Server Management Studio 2019
-FTHSE Asset Framework
-FTHSE Server v7.01
-FTH Analysis services
-FTH Notification services
-FT VantagePoint v8.20
-FT Services
Client 1 & 2
OS: Windows 10 Enterprise 2016 LTSB 64bit
Software installs :
-FT services,
-FTView SE Client
This is my first server commissioning and I've tried to follow the manuals best as I could. If there's anyone who's faced a similar problem and resolved it please share. Thank you.