Hi guys,
I have a simple (I think) application involving 2 SureServo SVA-2040 drives. What I want to do is to control the master servo with a 0-10V analog signal and have the slave follow the master using electronic gearing. My question is can I use the pulse output from the master to drive the slave without using anything else such as a PLC or separate encoder?
I have a simple (I think) application involving 2 SureServo SVA-2040 drives. What I want to do is to control the master servo with a 0-10V analog signal and have the slave follow the master using electronic gearing. My question is can I use the pulse output from the master to drive the slave without using anything else such as a PLC or separate encoder?