timodc
Member
Just started working with the Siemens PLC 115U - CPU942B.
I have:
0: 16x 115/230V AC 1A (465-7LA 11)
1,2: 32x DC 24V 0,5A (441-7LA 12)
3: Analoge input: 16/8 channels (465-7LA 13)
This is a better view of the whole PLC/control:
http://stud.hro.nl/0762476/rek.JPG
My question:
I can't figur out, how I can let the PLC proces the Input (of a couple of Volts on the Analog Input) to an Output (of 0/1 on one of the Digital Outputs)? I know you have fixed addresses for the Analog Input (in this case: Slot 3 = 224-255), but how do I use them? Does anyone have a good example?
friendly greetings,
Timo
I have:
0: 16x 115/230V AC 1A (465-7LA 11)
1,2: 32x DC 24V 0,5A (441-7LA 12)
3: Analoge input: 16/8 channels (465-7LA 13)
This is a better view of the whole PLC/control:
http://stud.hro.nl/0762476/rek.JPG
My question:
I can't figur out, how I can let the PLC proces the Input (of a couple of Volts on the Analog Input) to an Output (of 0/1 on one of the Digital Outputs)? I know you have fixed addresses for the Analog Input (in this case: Slot 3 = 224-255), but how do I use them? Does anyone have a good example?
friendly greetings,
Timo
Last edited: