Hi everyone, I hope you are well.
This is for a fire alarm HMI. The client wants a popup that traces a single fire detection device in a SINGLE ZONE on a map, or a ZONE SELECTION PAGE if there is multiple active device in one or multiple zone. I have this logic problem where I want to trigger a choice of 2 HMI pages depending on input conditions (single or multiple fire alarm).
We have 60 fire detection device covering 36 different zones.
-Page 1: IF the number of memory bits %M, for example between %M100 and %M200 returning a "1" is more than 1 (aka.: several bits AT THE SAME TIME)
-Page 2: if the number of memory bits %M, between %M100 and %M200 is EQUAL to 1.
Much appreciated,
Alex
This is for a fire alarm HMI. The client wants a popup that traces a single fire detection device in a SINGLE ZONE on a map, or a ZONE SELECTION PAGE if there is multiple active device in one or multiple zone. I have this logic problem where I want to trigger a choice of 2 HMI pages depending on input conditions (single or multiple fire alarm).
We have 60 fire detection device covering 36 different zones.
-Page 1: IF the number of memory bits %M, for example between %M100 and %M200 returning a "1" is more than 1 (aka.: several bits AT THE SAME TIME)
-Page 2: if the number of memory bits %M, between %M100 and %M200 is EQUAL to 1.
Much appreciated,
Alex