AI and DI programming

dgullige

Member
D
Join Date
Mar 2014
Location
Winter Springs
Posts
12
So I had a post earlier for programming a momentum through ProWorx 32... I've discovered the difference between programming e.g.: 40021 and 40021:14, one is straight analog and the other is digital. So with that being said; can anyone direct me to some literature or some basic steps to programming the digital input? (40021:14) Any help would be appreciated, thank you!
 

Similar Topics

E
Programming cable option for fx2n
Dear all, I have fx2n plc on my hand but I don't have the programming cable sc-09 and it would not be easy for me to get one. I need the cable...
Replies
3
Views
117
geniusintraining
geniusintraining
J
Siemens programming help
Hi all, i am the new controls guy at the plant and i have inherited a pc from the previous controls guy with Siemens tia portal version 16 and 17...
2
Replies
20
Views
897
dwoodlock
dwoodlock
S
GE 90-30 Programming
I need to pull the program off of an old 90-30 so I can convert it to Allen Bradley. This is my first time messing with GE and I don't have the...
Replies
2
Views
84
stateline
S
E
Powerflex 525 programming
New to vfds. I put in parameters. IP, but I get ethernet flashing and link solid. What did I do wrong?
Replies
9
Views
481
robertmee
R
A
Mitsubishi FX3 programming question
I'm been deciphering a program for a press here. I've gotten most of it deciphered using the manual to understand the instructions (first mitsu...
Replies
11
Views
312
parky
P
Back
Top Bottom