fredjohns
Member
I have a question about a couple of parameters on the 525 Drive. The parameters are as follows:
P033 Motor OL Current
P034 Motor NP FLA
What exactly is the difference between these 2 parameter. As an example, if we have a motor with a Name Plate FLA of 15 amps, would P034 be set for 15 and what would P033 be set for.
What problems can be caused if they are setting P034 either to high or to low as compared to the Motor Nameplate FLA
Any help will be greatly appreciated.
P033 Motor OL Current
P034 Motor NP FLA
What exactly is the difference between these 2 parameter. As an example, if we have a motor with a Name Plate FLA of 15 amps, would P034 be set for 15 and what would P033 be set for.
What problems can be caused if they are setting P034 either to high or to low as compared to the Motor Nameplate FLA
Any help will be greatly appreciated.