Ron Beaufort
Lifetime Supporting Member
there are several ways to set up the scaling for your input module ... we're not sure which of these setups you're using ... and (no offense) you're not really sure of what values are being used ...
now for the classic question:
are you allowed to post the ENTIRE project file (ACD extension) ... we can move along a LOT faster once we see what's behind the curtain ...
you might also put a milliamp meter in the circuit - and tell us how many mA are actually flowing through your module's input ... (that would probably be easier than working with the transmitter - at least at this point of the game) ...
and by all means - confirm that the transmitter is putting out the correct value ... (maybe it has various settings and adjustments that aren't quite right ...
now for the classic question:
are you allowed to post the ENTIRE project file (ACD extension) ... we can move along a LOT faster once we see what's behind the curtain ...
you might also put a milliamp meter in the circuit - and tell us how many mA are actually flowing through your module's input ... (that would probably be easier than working with the transmitter - at least at this point of the game) ...
and by all means - confirm that the transmitter is putting out the correct value ... (maybe it has various settings and adjustments that aren't quite right ...