rahul_pokhriyal
Member
Hi All,
Thanks in advance for your help.
Can anyone share his views on AB GuardLogix (L62S)fault errors.
On day to basis plant PLC is going into fault mode, and i have to download the same logic ahain and again.
While clearing the fault its displaying below errors:
(Type 14)-Safety Task Fault
(Code 07)-Safety Task Inoperable.
As i have checked the docs also its says these errors might be because of Complex Safety Logic, safety partner absence, signature mismatch etc.
I have checked all such things, there is no such safety logic error/warning, signature also present but still not able to resolve this problem as i am new to AB PLCs.
Kindly share your experience.
Regards, Rahul Pokhriyal....
Thanks in advance for your help.
Can anyone share his views on AB GuardLogix (L62S)fault errors.
On day to basis plant PLC is going into fault mode, and i have to download the same logic ahain and again.
While clearing the fault its displaying below errors:
(Type 14)-Safety Task Fault
(Code 07)-Safety Task Inoperable.
As i have checked the docs also its says these errors might be because of Complex Safety Logic, safety partner absence, signature mismatch etc.
I have checked all such things, there is no such safety logic error/warning, signature also present but still not able to resolve this problem as i am new to AB PLCs.
Kindly share your experience.
Regards, Rahul Pokhriyal....