darienpogi
Member
Hello Guys! I just want to ask if it is possible to control VFD Altivar 71 using PLC(LMC078) Schneider via Ethernet Communication.
I have installed the DTM for the Altivar71 but it still cannot get into the ethernet Network however the Altivar71 works with CANOpen Communication.
PLC Software: SoMachine Logic Builder
Controller: LMC078
VFD: Altivar71
The Image attached is for your reference.
Thank you
I have installed the DTM for the Altivar71 but it still cannot get into the ethernet Network however the Altivar71 works with CANOpen Communication.
PLC Software: SoMachine Logic Builder
Controller: LMC078
VFD: Altivar71
The Image attached is for your reference.
Thank you