Guys
I have to interface two machines.The first is ControlLogix with three servos that are cammed off a virtual.The second machine needs to follow the virtual as well. It is not A/B but can use an encoder signal. I plan to use the MAOC command and an output card that can be scheduled. The biggest problem with this method is a low pulse count per cycle.
Does anyone know a better method? All help appreciated.
I have to interface two machines.The first is ControlLogix with three servos that are cammed off a virtual.The second machine needs to follow the virtual as well. It is not A/B but can use an encoder signal. I plan to use the MAOC command and an output card that can be scheduled. The biggest problem with this method is a low pulse count per cycle.
Does anyone know a better method? All help appreciated.