Anybus converter from Profibus to ControlNet

Layton.motaung@gmail

Member
L
Join Date
May 2017
Location
Vanderbijlpark
Posts
1
I have successfully done a RsNetWorx scheduling on the converter., but still i can't get any status from it on RSLogix monitor tags. What can i do to test Profibus functionality on a standalone plc using the Anybus converter?
 

Similar Topics

T
HMS Anybus Bolt II Configuring in Logix
Hello all and happy Friday, I'm curious if anyone here has experience sending data over an Anybus Bolt II (HMS AWB6001-A) using a Compact Logix...
Replies
4
Views
777
EastSideSquirrel
E
D
Stuck Trying to Reconfigure Legacy Anybus Eth/Profibus gateway
We have a keg check weigher that that lost a fight to a forklift. The scale was previously a Systec IT3000, which was the only PROFIBUS slave...
Replies
5
Views
682
tarik1978
T
S
Batch controller integartion with MES using Anybus communicator
Complete novice trying to integrate an industrial fluid filling process into MES using an anybus communicator Hardware: Anybus Communicator...
Replies
3
Views
1,598
danw
danw
A
Classic Anybus gateway's PC connector
Hi, does anyone here sell the cable for the classic Anybus "PC connector"? I have a customer who has an old machine and he would like to retrieve...
Replies
5
Views
1,846
bkottaras
B
einnh
ProfiNet Anybus gateway question
We have been using ProfiBus Gateways to connect to a piece of equipment. The equipment interface is through a PB/PB adapter that we connect...
Replies
2
Views
1,815
Ken Moore
Ken Moore
Back
Top Bottom