Anyone here work for Allen Bradley?
- Thread starter david90
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
There are a handful of PLCTalk members who are current or former Rockwell Automation employees.
I'm one of them; I held the variously-titled "PLC guy" job in Seattle for about thirteen years.
Send me a PM and I'll dish what I know about the field offices and the various headquarters, if you're interested.
I'm one of them; I held the variously-titled "PLC guy" job in Seattle for about thirteen years.
Send me a PM and I'll dish what I know about the field offices and the various headquarters, if you're interested.
Similar Topics
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
I received an email from a student with the following code attached. This is supposed to control a floodgate system, and supposed to be written...
Hi all,
I am experienced with Rockwell by have recently encountered a Bosch PLC. It’s an IndraControls XM21 V14. I installed the software and...
Hi there,
I need to work on a GE series 5 PLC which need DOS based Logic Master 5, it seems like nowhere I can purchase this software anymore...
We run multiple products on our machines, which means we have multiple robot programs that we swap to, due to the points for the robots having to...