OkiePC
Lifetime Supporting Member
What is the best method for taking Autocad drawings and generating bitmaps that can be pasted in PanelBuilder32 v3.81?
I have an overview drawing of a robot cell and associated conveyors, photocells, barcode readers, and pneumatic equipment.
I want to be able to chop it up into several screens and create bitmaps of each section for use as a background on the diagnostic pages in a panelbuilder32 app.
The objects in the Autocad 2004 drawing are a mixture of lines, rectangles, circles, arcs, and symbols on about 30 different layers.
Should I just use acad to get it looking how I want and then <CTRL + Print Screen>, then <CTRL + V> in MSPaint?
I thought I would pick your brains before I waste a bunch of time experimenting on my own.
All advice and opinions welcome...
Paul
I have an overview drawing of a robot cell and associated conveyors, photocells, barcode readers, and pneumatic equipment.
I want to be able to chop it up into several screens and create bitmaps of each section for use as a background on the diagnostic pages in a panelbuilder32 app.
The objects in the Autocad 2004 drawing are a mixture of lines, rectangles, circles, arcs, and symbols on about 30 different layers.
Should I just use acad to get it looking how I want and then <CTRL + Print Screen>, then <CTRL + V> in MSPaint?
I thought I would pick your brains before I waste a bunch of time experimenting on my own.
All advice and opinions welcome...
Paul