BACNet/Ethernet to AB PLC with RedLion

Cmurph

Member
C
Join Date
Jul 2021
Location
Wisconsin
Posts
1
I am trying to get data from a Chiller to an AB PLC or to my SCADA system. The protocol is BACNet/Ethernet, which is a layer2 protocol distinct from BACNet/IP . I am trying to set up my RedLion DA10D to convert the BACNet to something my PLC can interact with. No luck so far.

I attached what I can see with m YABE software.

PLCS.net.png
 

Similar Topics

A
Ethernet/IP to BacNet/IP solution
Hi all, I have a customer who wishes to to display some of the information from their refrigeration plant (CompactLogix PLC on Ethernet/IP) on...
Replies
9
Views
1,517
KuulKuum
KuulKuum
R
ProSoft Ethernet/IP to BACnet/IP. Gateway or ControlLogix Slot Unit
Good Morning from the "Waist Deep in Snow" Mid Atlantic. I have a question about the 2) options that ProSoft has for Ethernet/IP to BACnet/IP...
Replies
4
Views
4,452
Scadadoctor
S
D
BACNet to Ethernet I/P Gateway?
Well i successfully completed the Modbus RTU to Ethernet I/P project and now i have a BACNet MS/TP to Ethernet I/P, CompactLogix project. Trane...
Replies
5
Views
3,686
JeffKiper
JeffKiper
BobB
Protocol Converter - BACnet to Ethernet IP
I am in need of a protocol converter from BACnet to Ethernet IP and vice versa. The Ethernet IP end will be an Omron PLC (probably CJ2M) and the...
Replies
10
Views
9,805
504bloke
504bloke
JaxGTO
Ignition and BACNet Driver
Anyone have success using Ignition 8 and the BACNet driver? We are going to try and read data out of our Carrier Chiller. Carrier tech is...
Replies
0
Views
585
JaxGTO
JaxGTO
Back
Top Bottom