Baumer verisens vision in Tia

[stu]

Hi has anyone set up a baumer verisens vision on profinet with Siemens tia ?
I have set up on profinet and got it working to a fashion but would like to get result data into the plc like current job or actual data of a qr code

I have attached a picture of the I and Q address on the vision and the manual profinet info?

I’m confused .if I was the result data in the plc do I add the byte number to the I address I address starts at 68 and the result data byte in the manual is 19 so do I add 19 to 68 =I87 and would that be a bin ,string, Dword
The qr code has letters and numbers is Pac12345678 if that makes a difference
This has confused me any information will help

 

[drbitboy]

Can you provide the values of addresses 50 through 102? Hexadecimal would be best, but not necessary.

Do any of the following 32-bit values show up (decimal and hexadecimal shown)?

[(828596560, '0x31636150'), (1348559665, '0x50616331')]
[(842097505, '0x32316361'), (1633890610, '0x61633132')]
[(858927459, '0x33323163'), (1664168499, '0x63313233')]
[(875770417, '0x34333231'), (825373492, '0x31323334')]

 

[stu]

thanks drbitboy I will create a watch table with I:50-102
I will try this and see what I can see , can hex or decimal be converted to a string

 

[drbitboy]

thanks drbitboy I will create a watch table with I:50-102
I will try this and see what I can see , can hex or decimal be converted to a string

Yes, usually. I can't imagine it will be difficult. COPy the DINTs to an ARRAY[0..N] of Char, maybe?


E.g. see here.