[email protected]
Member
Hello
i am having trouble mapping the variables i defined to the physical I/O modules on the plc
I have scanned the plc from within the system manager and it has returned 3 devices to me. i chose device 1 as it said "CX9000" which is my plc. in the tree menu it gave only one option below the device 1 which can be seen in the attached image.
i went through the procedure for appending terminals by specifying the i.o modules such as KL1480 etc...i downloaded the program however when i force the signals in plc control the relevant i/o light on front of the l/O modules will not light.
regards
brendan
i am having trouble mapping the variables i defined to the physical I/O modules on the plc
I have scanned the plc from within the system manager and it has returned 3 devices to me. i chose device 1 as it said "CX9000" which is my plc. in the tree menu it gave only one option below the device 1 which can be seen in the attached image.
i went through the procedure for appending terminals by specifying the i.o modules such as KL1480 etc...i downloaded the program however when i force the signals in plc control the relevant i/o light on front of the l/O modules will not light.
regards
brendan