[email protected]
Member
hello
could anyone tell me how to set up the KL5111 module on the Beckhoff plc to display a speed value from an encoder.
I believer the KL5111 will only accept an incremental encoder signal
if someone has some sample program or some explanation on how to do it, it would be a great help.
thanks in advance
could anyone tell me how to set up the KL5111 module on the Beckhoff plc to display a speed value from an encoder.
I believer the KL5111 will only accept an incremental encoder signal
if someone has some sample program or some explanation on how to do it, it would be a great help.
thanks in advance